Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 29 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Once your sunhood is fitted, the back
canvas of the sun canopy can be secured
by looping the hook & loop strap around the
sunhood receiver bracket as shown in Fig 6,
right.
Fig 6
The sunhood will now be fitted to the chair,
as shown in Fig. 7.
Fig. 7
You can now adjust the sunhood to the
desired angle. To do this, simply adjust the
hood to the position you desire then tighten
the thumb screws to hold the hood securely
in place. Each time you wish to change the
angle of the hood, you must first loosen the
thumb screws, adjust the angle as desired
and then ensure that you retighten the
screws to prevent them falling off.
Removing The Sunhood
To remove the hood, first unfasten the hook and loop strap (shown in Fig 6) and then
press in the button clips (shown in Fig 5). You may fit it easier to release one button clip at
a time. Once both button clips are out of your chosen hole position, the hood will then be
free to lift out of the receiver brackets.
