Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 39 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Fig 6.4.2
The angle adjustable vertical stems will be in
the bag and need to be fitted. When
attaching the angle adjustable vertical stems
to the depth adjustment brackets, most
people should attach vertical stem A to depth
adjustment bracket A (as illustrated in Fig
6.4.3) and then B to B.
However, if you require more outward
adjustment (i.e. for the playtray to be further
away from the occup
ant’s torso), instead of
attaching A to A and B to B, you can attach
vertical stem A to depth adjustment bracket
B and then vertical stem B to depth
adjustment bracket A.
Fig 6.4.4
The playtray is supplied with the
depth adjustment brackets fitted to
the tray (as illustrated in Fig 6.4.2)
These are marked with the letters A
and B. A is one side, B is the other.
Fig 6.4.3
To fit the playtray to the seat, locate
the 2 vertical stems on the bottom
of the tray into the 2 receivers on
the seat unit. Note there may be a
small plastic cap in the top of the
receiver. If this is the case, remove
the cap using a small flat bladed
screwdriver
before
fitting
the
playtray.
Screw the 2 thumbwheels supplied
with the tray into the welded nut on
the receivers as shown (see Fig
6.4.4). Position the tray to the
required height, and then secure it
in
place
by
tightening
the
thumbscrews.
Vertical stem A
Fitted depth
adjustment
bracket A
Fitted depth adjustment brackets and
thumbscrews
