Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 11 of 54
January 2019
Snappi Seat Standalone User Manual.doc
IMPORTANT:
❖
Always ensure that the seat interface clips are fully closed. To test this, press down on the
release lever when fitted and make sure the clips will not move (see fig 4.5).
❖
Always lock the safety catch before using the pushchair.
❖
Always unlock the safety catch before fitting or removing the seat. Attempting to fit or
remove the seat with the catch locked could cause damage to the seat or the chassis.
❖
Do not attempt to fit the seat backwards. It will not lock in a rearward facing position.
❖
The seat interface system is spring loaded, so ensure your fingers are clear of the clips when
fitting or removing.
