Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 43 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Fig 6.7.3
To adjust the tension around the ankle, or to
release the ankle cuffs, adjust the Hook &
loop strap around the front (see arrow, Fig
6.7.3, left).
Fig 6.7.4
Fig 6.7.5
Fig 6.7.6
Fig 6.7.7
To fit or remove the ankle cuffs from the foot plate (e.g. for washing) thread the strap
through the mounting bracket as shown in figures 6.7.4 to 6.7.7 above.
Note:
The above instructions are for guidance only as other styles of ankle cuffs may be
fitted.
Important:
•
The ankle cuffs are intended for positioning only and are not to be used as a
restraint for transportation.
•
Do not over tighten the ankle cuffs. Always ensure the occupant is comfortable.
Note:
If ankle cuffs are supplied after purchase of your seat, please follow the
manufacturer’s fitting instructions. It may be necessary to change the fixings depending on
the size of footplate and type of ankle cuffs provided. All required fixings will be included.
Fitting of the ankle cuffs should only be done by a competent tradesperson.