Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 33 of 54
January 2019
Snappi Seat Standalone User Manual.doc
Rainshield Instructions
To fit the plastic rainshield, unfold it from its
packaging and place over the sunhood with
the hook & loop rainshield flap facing the
front (i.e. world as opposed to occupant
facing). The sunhood angle needs to be set
to match the seemlines to those on the
rainshield. Next tuck the elasticated edge
under the footrest as shown in Fig 9, right.
Note, you may not be able to use back
recline at the same time as the rainshield
(tilt in space can still be used).
Fig. 9
Fig. 10
The rainshield has a back flap to minimise
wind and rain infiltration. To keep the back
flap in place, tuck this down inside the push
handle and fasten the hook & loop fixings
which are located on both the back flap and
the main skirt of the rainshield. It should now
look like Fig. 10, left,
Once you have stuck the hook & loop
together, you may need to adjust the
rainshield to help ensure that the rain shield
is straight (See Fig 10).
Fig. 11
