Snappi Seat Standalone User Manual
Document No: 053-07 v5
Page 32 of 54
January 2019
Snappi Seat Standalone User Manual.doc
The sunhood will now be fitted to the chair,
as shown in Fig. 7.
Fig. 7
You can now adjust the sunhood to the
desired angle. To do this, simply adjust the
hood to the position you desire then tighten
the thumb screws to hold the hood securely
in place. Each time you wish to change the
angle of the hood, you must first loosen the
thumb screws, adjust the angle as desired
and then ensure that you retighten the
screws to prevent them falling off.
Fig. 8
