Tema Telecomunicazioni AA-600/SM5 Series Technical Manual And Integration Manual Download Page 38 | Manualshive

Page: 38 / 56

background image

TEMA TELECOMUNICAZIONI SRL

IP Module AA-600

MAS-AA600-REV02EN

Page 38 of 56

10. MAINTENANCE

10.1. System

On this page it is possible to check the current firmware version, update software, and backup / restore the system
configuration:

•

MAC address:

is the physical address assigned to the network interface.

•

Firmware version:

displays the currently installed version of the program. It is possible to upload a different

version (possibly provided by the technical support of TEMA) using the Browse / Update. Once you've
uploaded the new version, the device must be restarted.

•

License:

enter in this field the license key to activate any additional services (such as the use of messages

over 16 seconds).

•

Backup and restore:

it is possible to save the current settings to restore them in case of a programming

error or device replacement.

•

Reset to factory settings:

all settings are lost and reset to factory defaults. You are prompted to confirm the

operation.

•

Device reboot:

reboot as if it were taken away and put back power. Useful in case you have not physically

present in front of the device and it needs to restart it. You are prompted to confirm the operation.

NOTE: at the end of the programming of a device it is advisable to carry out a BACKUP of the configuration, a text
file (.TXT) will be saved which can be named as desired, so that for any future programming errors, the previous
working version can be restored through the appropriate procedures indicated in the mask. For example, in the
event of a device failure, it can be replaced with a new one and the TXT file of the previous device can be recalled
for recovery. At the end, always restart the device, each time the configuration is restored.

«
...
36
37
38
39
40
...
»

Summary of Contents for AA-600/SM5 Series

























































Reviews:

No comments

Related manuals for AA-600/SM5 Series

Brand: Abicor Binzel Pages: 8

Brand: Gardena Pages: 18

VLT Micro Drive FC 51 Series

Brand: Danfoss Pages: 23

Brand: FASAR ELETTRONICA Pages: 2

Brand: Faro Barcelona Pages: 8

Brand: Faro Pages: 3

Brand: YASKAWA Pages: 456

Brand: Lawler Pages: 4

Brand: QTP Pages: 2

Brand: Magnescale Pages: 3

Brand: nekos Pages: 8

Brand: nekos Pages: 8

Brand: Neles Pages: 12

Brand: Yoshitake Pages: 4

Brand: YOKOGAWA Pages: 20

UTAdvanced UT32A

Brand: YOKOGAWA Pages: 3

Brand: York Pages: 24

Brand: CAME Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands