Tema Telecomunicazioni AA-600/SM5 Series, Technical Manual And Integration Manual, Page: 26 / 56

TEMA TELECOMUNICAZIONI SRL
IP Module AA-600
MAS-AA600-REV02EN Page 26 of 56
The commands described here by default will have these codes:
DTMF
Command
Function Description
#1
Activate the door
opener contact of relay 1
Used to activate the electric lock connected to the first
relay during communication, it is a 2-digit code, by
default #1.
#2
Activate the door
opener contact of relay 2
Used to activate the second relay during
communication, it is a 2-digit code, by default #2.
#5 Conversation time extension
Continuing the conversation with the visitor, at the
notice of AA-600 regarding the expiration of the same,
it is possible to reload the original time to continue the
conversation. AA-600 warns with some tones 30
seconds before closing.
Normally it is possible to reach AA-600 from any extension of the PBX to issue DTMF commands, simply by dialing
the number of the internal extension to which AA-600 is connected.
9.11. Acquisition of input contacts
The mask shows up to 6 inputs, but only the first is available on this AA-600 model, the other fields have no
function.
•
Call.. : number or IP address of the phone to contact when the alarm condition is triggered. The input could
be also used as “door opener”: enter the number of the relay preceded by #. For exampe #1 activate the
relay 1, #2 activate the relay 2. The activation time is the one entered in the activation time filed.
•
Attempts:
number of call attempts (max 999)
•
Separation: separation, in seconds, between a call attempt and the other (max 999).
•
Delay: it is the minimum time, in seconds, before validating the input. It could be useful, for example, to
mask an open door switch. Supposing the maximum time of a pedestrian gate is 30 seconds, at the end of
this time (if the switch would be still active) an alarm will be send to the reception.
•
Inversion: the contact is normally open and the alarm occurs at the closing of the same. Enabling this flag it
is possible to instruct the device to behave in the opposite way (the contact is normally closed and the
alarm occurs at the opening).
•
Stop code:
code to dial on the phone calling to accept and acknowledge the alarm (max 3 digits).
•
Announce: when activating this input, a prerecorded message will be played on the speaker. See
messages management.