Tema Telecomunicazioni AA-600/SM5 Series Technical Manual And Integration Manual Download Page 16 | Manualshive

Page: 16 / 56

background image

TEMA TELECOMUNICAZIONI SRL

IP Module AA-600

MAS-AA600-REV02EN

Page 16 of 56

Once you find the right connection, click on it with the right mouse button and from the pull-down menu that
appears choose "Properties". Then the following window appears:

From the previous window, click "Internet Protocol (TCP / IP)" and click on "Properties". This will open the following
window where it is possible to configure the IP addresses that the network card will use:

If  the  PC  is  already  on  subnet  192.168.0.x  with  a  mask  255.255.255.0,  ignore  the  following  steps.  Otherwise,
proceed as follows. (The address of the PC configuration should not be 192.168.0.10).

Remember  the  current  TCP  /  IP  configuration  of  your  computer  for  any  subsequent  restore  of  the  correct
parameters.

Click  "Use  the  following  IP  address"  and  type  in  the  appropriate  field  the  following  IP  address:  192.168.0.11
(instead of  "11"  used  in  the  example  it  is  possible  to  enter  any  number  between  1  and  254,  but  excluding  the  10
which  is  the  default  address  of  the  door  phone  to  be  programmed).  In  the  "Subnet  Mask"  enter  the  netmask
255.255.255.0. Click OK to confirm the changes. The PC is now ready to configure the door phone. Remember at
the end of programming to restore the network configuration of the PC to its original state if necessary.

Once  you  have  successfully  configured  the  IP  address  of  your  PC,  it  is  possible  to  reach  the  Web  interface  to
configure AA-600.

«
...
14
15
16
17
18
...
»

Summary of Contents for AA-600/SM5 Series

























































Reviews:

No comments

Related manuals for AA-600/SM5 Series

Brand: Samson Pages: 100

Brand: Radio Shack Pages: 3

Brand: ECKELMANN Pages: 178

Brand: Van Air Pages: 4

Brand: U-Prox Pages: 3

Brand: York Pages: 24

Brand: Nice Pages: 120

Brand: W.E.ST. Pages: 34

Brand: Ltech Pages: 4

Brand: Motor Guard Pages: 2

Brand: K&K Pages: 6

WisLink LPWAN RAK5146

Brand: RAKwireless Pages: 9

CURTIS DC Series

Brand: NOCO Genius Pages: 2

Brand: TimeTec Security Pages: 2

Brand: Xylem Pages: 2

Brand: Elo TouchSystems Pages: 2

Brand: Veichi Electric Pages: 8

Brand: Grundfos Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands