Tema Telecomunicazioni AA-600/SM5 Series Technical Manual And Integration Manual Download Page 3 | Manualshive

Page: 3 / 56

background image

TEMA TELECOMUNICAZIONI SRL

IP Module AA-600

MAS-AA600-REV02EN

Page 3 of 56

RECOMMENDATIONS

1.

It is recommended to read this entire manual before proceeding to the installation of the device.

2.

The installation and commissioning of the device can only be performed by specialized technicians.

3.

The device is accurately manufactured and tested. In any case, the product is not recommended for use
where an error of operations can cause property damage and/or injury to persons.

4.

It is expressly not recommended maintenance inside the device which must be carried out by Tema
Telecomunicazioni, the removal of the closures will invalidate the warranty and makes accessible internal
parts with risk of electric shock.

5.

Tema  Telecomunicazioni  accepts  no  responsibility  for  damage  to  property  and/or  persons  resulting  from
incorrect  use  of  the  equipment  or  by  procedures  that  do  not  comply  with  the  instructions  in  this  manual.
Tema  Telecomunicazioni  reserves  the  right  to  make  modification  to  the  technical  and  functional
specifications at any time and without any notice.

6.

Products powered via PoE (Power over Ethernet) may only be connected with cables coming from the
internal network company (inside the building), are not allowed connections LAN cables coming from outside
the building.

7.

Use for this device only and exclusively original spare parts and consumables supplied by Tema
Telecomunicazioni. The company is not responsible for damage caused by the use of materials not supplied
by the same.

8.

Do not expose the unit to direct sunlight, protect from heat, dust, humidity and chemicals.

9.

Tema Telecomunicazioni reserves the right to vary the product characteristics for improvement without prior

notice. Check the

WWW.TEMATLC.IT

website for any updates to the latest firmware, manuals, and

technical documentation.

10. This document is property of Tema Telecomunicazioni, It is forbidden any duplication and reproduction, even

partial, as well as storage on any medium without written permission of Tema Telecomunicazioni.

This symbol in the descriptions indicates a general warning or a damage danger
to equipment or people.

This symbol in the descriptions indicates useful information or a suggestion for
the optimization of the device functionality.

This symbol in the descriptions indicates a danger from electric shock due to damage to the
equipment or to people.

«
1
2
3
4
5
...
»

Summary of Contents for AA-600/SM5 Series

























































Reviews:

No comments

Related manuals for AA-600/SM5 Series

Brand: Waterway Pages: 16

Brand: Bang & Olufsen Pages: 80

Brand: Bang & Olufsen Pages: 13

Brand: Cansec Pages: 45

Brand: Cansec Pages: 43

Brand: Cansec Pages: 32

Brand: Magellan Pages: 2

Brand: National Instruments Pages: 40

Brand: National Instruments Pages: 28

Brand: National Instruments Pages: 7

Brand: National Instruments Pages: 22

Brand: YASKAWA Pages: 121

Brand: YASKAWA Pages: 17

Brand: YASKAWA Pages: 58

Brand: YASKAWA Pages: 30

Smart Control Panel 880RGD

Brand: Raynor Pages: 4

Brand: Fox Pages: 5

UNDER CONTROL CP-30A PILOT

Brand: G-Force Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands