manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 123

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

123

2018-02-16

PRELIMINAR

Y

Synchronous Response

Table 262, page 123

, describes the synchronous responses and remarks for Network Ping 

command.

10.1.2  Service Discovery using NmDNS

10.1.2.1  Start NMDNS Server

This command is used to start the server in mDNS module. Before issuing this command 
is required to issue L2 and L3 commands.

Command Syntax

AT+NMDNSSSTART

Parameter Description

Table 263, page 123

, describes the Start NMDNS Server parameters.

Response

Table 264, page 124

, describes the responses and remarks for Start NMDNS Server 

command.

Table 261   Network Ping Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 262   Network Ping Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 263   Start NMDNS Server Parameters

Parameters Mandatory/Optional

Value

Description

Start

Mandatory

Value range:

N/A

Format:

 N/A

Default value:

 

N/A

It indicates the mDNS module to start.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands