manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 92

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

92

2018-02-16

PRELIMINAR

Y

Response

Table 181, page 92

, describes the responses and remarks for Socket Receive Ready 

command.

Synchronous Response

Table 182, page 92

, describes the synchronous responses and remarks for Socket Receive 

Ready command.

9.2.11  Socket Send

This command is used to send the data to a specified address. Prior to issuing this 
command, user is required to establish L2 and L3 connection.

Command Syntax

AT+SN=<CID>,[<Destination Address>,<Port Number>,<Data>]

Parameter Description

Table 183, page 93

, describes the Socket Send parameters.

Table 180   Socket Receive Ready Parameters

Parameters Mandatory/Optional

Value

Description

CID

Mandatory

Value range:

0-15

Format:

 Integer

Default value:

 0

It specifies the value given by issuing 

AT+SC command for UPD or AT+SA for 

TCP.

Table 181   Socket Receive Ready Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 182   Socket Receive Ready Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands