manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 107

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

107

2018-02-16

PRELIMINAR

Y

Response

Table 225, page 107

, describes the responses and remarks for SSL Send command.

Synchronous Response

Table 226, page 107

, describes the synchronous responses and remarks for SSL Send 

command.

Table 224   SSL Send Parameters

Parameters

Mandatory/Optional

Value

Description

CID

Mandatory

Value range:

0-15

Format:

 Integer

Default value:

 0

It specifies the value given by issuing 
command AT+NSSLINIT.

Destination IP Address

Optional

Value range:

7-40

Format:

 Integer

Default value:

 

0.0.0.0

It specifies the destination IP address to 
send the data

Destination port number

Optional

Value 
range:

1-1460

Format:

 Integer

Default value:

 0

It specifies the port number of the 
destination IP address to sent the data.

Data

Optional

Value 
range:

0-65535

Format:

 Binary

Default value:

 

Welcome to Telit

It specifies the data to be sent.

Table 225   SSL Send Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 226   SSL Send Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands