manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 27

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

27

2018-02-16

PRELIMINAR

Y

Example 

ATZ0
OK

6.3.2  Save Profile

This command is used to save the profile to the file system.

Command Syntax

AT&WNP=<Profile Number>

Parameter Description

Table 16, page 27

, describes the Save Profile parameters.

Response

Table 17, page 27

, describes the responses and remarks for Save Profile command.

Example 

AT&W0
OK

6.3.3  Set Profile

This command is used to set the profile to the specified profile number.

Command Syntax

AT&Yn=<Profile Number>

Table 15   Read Profile Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 16   Save Profile Parameters

Parameters Mandatory/Optional

Value

Description

Profile 
Number

Mandatory

Value range: 

0-1

Format:

 Integer

Default value:

 

N/A

It specifies the profile number to be saved.

Table 17   Save Profile Response

Responses

Remarks

SUCCESS

Success.

FAILURE

Failure.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands