manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 113

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

113

2018-02-16

PRELIMINAR

Y

Table 237, page 113

, describes the responses and remarks for MQTT Subscribe command.

Synchronous Response

Table 238, page 113

, describes the synchronous responses and remarks for MQTT 

Subscribe command.

9.4.5  MQTT Disconnect

This command is used to disconnect MQTT connection. Prior to issuing this command, 
user is required to establish MQTT connection.

Command Syntax

AT+NMQTTDISCONNECT=<CID>

Parameter Description

Table 239, page 113

, describes the MQTT Disconnect parameters.

Response

Table 240, page 114

, describes the responses and remarks for MQTT Disconnect 

command.

Table 237   MQTT Subscribe Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 238   MQTT Subscribe Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 239   MQTT Disconnect Parameters

Parameters Mandatory/Optional

Value

Description

CID

Mandatory

Value range:

0-15

Format:

 Integer

Default value:

 

N/A

It specifies the connection ID returned 
during the MQTT connect command.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands