manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 114

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

114

2018-02-16

PRELIMINAR

Y

Synchronous Response

Table 241, page 114

, describes the synchronous responses and remarks for MQTT 

Disconnect command.

9.4.6  MQTT Receive Request

This command is used to send receive request. Prior to issuing this command, user is 
required to establish MQTT connection.

Command Syntax

AT+NMQTTRR=<CID>

Parameter Description

Table 242, page 114

, describes the MQTT Receive Request parameters.

Response

Table 243, page 115

, describes the responses and remarks for MQTT Receive Request 

command.

Table 240   MQTT Connect Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 241   MQTT Disconnect Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 242   MQTT Receive Request Parameters

Parameters Mandatory/Optional

Value

Description

CID

Mandatory

Value range:

0-15

Format:

 Integer

Default value:

 

N/A

It specifies the connection ID returned 
during the MQTT connect command.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands