manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 87

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

87

2018-02-16

PRELIMINAR

Y

Table 165, page 87

, describes the Socket Create parameters.

Response

Table 166, page 87

, describes the responses and remarks for Socket Create command.

Synchronous Response

Table 167, page 87

, describes the synchronous responses and remarks for Socket Create 

command.

9.2.6  Socket Information

This command is used to get the information of the socket. Prior to issuing this command, 
user is required to establish L2 and L3 connection.

Command Syntax

AT+SI=<CID>

Table 165   Socket Create Parameters

Parameters Mandatory/Optional

Value

Description

Family

Mandatory

Value range:

2-5

Format:

 Integer

Default value:

 0

It specifies the communication domain in 
which a socket is required to be created.

Type

Mandatory

Value range:

1-3

Format:

 Integer

Default value:

 0

It specifies the type of socket to be created.

Protocol

Optional

Value range: 

0-255, 
1536-2147483647

Format:

 Integer

Default value:

 0

It specifies the particular protocol to be 
used along with the socket.

Table 166   Socket Create Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 167   Socket Create Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands