manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 61

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

61

2018-02-16

PRELIMINAR

Y

7.2.8  Create Network

This command is used to create a Network. Prior to issuing this command, the user is 
required to issue the initialize NCM command.

Command Syntax

AT+WNCR=<WHANDLE>,<SSID>,<Channel>,<Security Type>,<Encryption 
Time>,[<Passphrase>]

Parameter Description

Table 103, page 61

, describes the Create parameters.

Table 102   Connection Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 103   Create Network Parameters

Parameters Mandatory/Optional

Value

Description

WHANDLE Mandatory

Value range: 

0,1

Format:

 Integer

Default value:

 0

It specifies the return value from 

AT+WNI=1 command.

The user is required to be in AP mode 
while issuing this command.

SSID

Mandatory

Value range: 

1-32

Format:

 String

Default value:

 

Telit_Guest

It specifies the SSID that has to be 
connected. 
The user required to provide the SSID of 
the AP to be connected.

Channel

Mandatory

Value range: 

1-14,36,40,44,48,5
2,56,60,64,100,104
,108,112,116,132,1
36,140,149,153,15
7,161,165

Format:

 Integer

Default value:

 6

Unit: 

N/A

It specifies the channel of an AP to 
connect.
If channel is not mentioned then the 
command scans all the channel to find an 

AP to connect.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands