manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 88

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

88

2018-02-16

PRELIMINAR

Y

Parameter Description

Table 168, page 88

, describes the Socket Information parameters.

Response

Table 169, page 88

, describes the responses and remarks for Socket Information command.

Synchronous Response

Table 170, page 88

, describes the synchronous responses and remarks for Socket 

Information command.

9.2.7  Socket Status Information

This command is used to get the status of information in the socket. Prior to issuing this 
command, user is required to establish L2 and L3 connection.

Command Syntax

AT+SS=<CID>,[<Reset counters>]

Parameter Description

Table 171, page 89

, describes the Socket Status Information parameters.

Table 168   Socket Information Parameters

Parameters Mandatory/Optional

Value

Description

CID

Mandatory

Value range:

0-15

Format:

 Integer

Default value:

 0

It specifies the value given by issuing 

AT+SC or AT+SA command.

Table 169   Socket Information Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 170   Socket Information Synchronous Response

Responses

Remarks

+SI:IPv4/IPv6,TCP/UDP,L
ocalip (in case of 
server)/serverip (in case of 
client), Localport (in case of 
server)/serverport (in case of 
client)

If socket exists.

FAILURE

If there is no socket.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands