manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 39

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

39

2018-02-16

PRELIMINAR

Y

Synchronous Response

Table 50, page 39

, describes the synchronous responses and remarks for Data Mode 

command.

6.4.12  Verbose Mode

This command is used to enable or disable Verbose mode.

Command Syntax

ATVn

Parameter Description

Table 51, page 39

, describes the Verbose Mode parameters.

Response

Table 52, page 39

, describes the responses and remarks for Verbose Mode command.

Table 49   Data Mode Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 50   Data Mode Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 51   Verbose Mode Parameters

Parameters Mandatory/Optional

Value

Description

n

Mandatory

Value range: 

0,1

Format:

 Integer

Default value:

 1

It specifies the enable or disable of Echo 
mode, where:
1- enables Verbose mode
0- disable Verbose mode.

Table 52   Verbose Mode Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands