manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 37

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

37

2018-02-16

PRELIMINAR

Y

Response

Table 43, page 37

, describes the responses and remarks for Get Auto Mode command.

Synchronous Response

Table 44, page 37

, describes the synchronous responses and remarks for Get Auto Mode 

command.

6.4.10  Data Mode

This command is used to enable Data mode.

Command Syntax

ATAn

Parameter Description

Table 45, page 37

, describes the Data Mode parameters.

Table 42   Get Auto Mode Parameters

Parameters

Value

Description

Status

Value range: 

0,1

Format:

 String

Default value:

 1

It specifies the status of the Auto mode 
operation (ENABLE or DISABLE).

Table 43   Get Auto Mode Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 44   Get Auto Mode Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 45   Data Mode Parameters

Parameters Mandatory/Optional

Value

Description

CID

Mandatory

Value range: 

0-15

Format:

 Integer

Default value:

 

115200

It specifies the data mode that has to be 
enabled for the CID.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands