manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 43

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

43

2018-02-16

PRELIMINAR

Y

6.7  SNTP Settings

6.7.1  SNTP Configuration

This command is used to configure the server in SNTP module. Prior to issuing this 
command, user is required to issue SNTP start command.

Command Syntax

AT+NSNTPCFG=<Server Address>,<Server ID>

Parameter Description

Table 58, page 43

, describes the SNTP Configuration parameters.

Response

Table 59, page 43

, describes the responses and remarks for SNTP Configuration command.

Synchronous Response

Table 60, page 44

, describes the synchronous responses and remarks for SNTP 

Configuration command.

Table 58   SNTP Configuration Parameters

Parameters Mandatory/Optional

Value

Description

Server 

Address

Mandatory

Value range:

1-32

Format:

 String

Default value:

 

pool.ntp.org

It specifies the server address to be 
configured.

Server ID

Optional

Value range: 

0x0,0x1,0xFFFF

Format:

 Hexa

Default value:

 

FFFF

It specifies the ID of the server to be 
configured.

Table 59   SNTP Configuration Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands