manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 18

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

18

2018-02-16

PRELIMINAR

Y

–

Obtain IP Address and Start Data Transfer.

–

Select advanced services if any.

4. Debug Host and GainSpan module

–

Debug using provided AT commands and other options if required. (Refer 
WE866E4-P AT Command Reference Guide)

– Analyze using Wire shark over wireless. For more details, refer information about 

AirPcap Nx in http://www.riverbed.com

5. Production Process

–

Perform generic recommendations in production line

–

Perform RF tests

3.2  Using SDK Builder

3.2.1  Serial-to-WiFi Module Information

Selecting the Serial-to-WiFi (Hosted) under the SDK Builder Configuration screen 
displays the module information that includes the module selected, firmware version.

NOTE:  

Refer “WE866E4-P Use Case Reference Guide document for detailed 

use cases and examples

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands