manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 36

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

36

2018-02-16

PRELIMINAR

Y

6.4.8  Auto Mode

This command is used to enable or disable Auto mode.

Command Syntax

ATCn

Parameter Description

Table 39, page 36

, describes the Auto Mode parameters.

Response

Table 40, page 36

, describes the responses and remarks for Auto Mode command.

Synchronous Response

Table 41, page 36

, describes the synchronous responses and remarks for Auto Mode 

command.

6.4.9  Get Auto Mode

This command is used to get the status of the Auto mode operation.

Command Syntax

ATCn?

Parameter Description

Table 42, page 37

, describes the Get Auto Mode parameters.

Table 39   Auto Mode Parameters

Parameters Mandatory/Optional

Value

Description

n

Mandatory

Value range: 

0,1

Format:

 Integer

Default value:

 1

It specifies the Auto mode being enabled 
or disabled.
1 - enables Auto mode
0- disables Auto mode.

Table 40   Auto Mode Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 41   Auto Mode Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands