manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 48

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

48

2018-02-16

PRELIMINAR

Y

7.1.2  Scanning

This command is used to scan the WLAN channel and provide information of the 
surrounding APs. Prior to isuing this command user is required enable the WLAN interface 
using the initialization command.

Command Syntax

AT+WS=<WHANDLE>,[<SSID>,<Channel>]

Parameter Description

Table 72, page 48

, describes the Scanning parameters.

Response

Table 73, page 49

, describes the responses and remarks for Scanning command.

Table 71   Initialization Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 72   Scanning Parameters

Parameters Mandatory/Optional

Value

Description

WHANDLE Mandatory

Value range: 

0,1

Format:

 Integer

Default value:

 1

It specifies the Device ID of the WLAN 
interface on which scanning of the 
available SSID occurs , where
0- specifies disables WLAN interface
1- specifies enable the WLAN interface.

SSID

Optional

Value range: 

0-32

Format:

 String

Default value:

 

N/A

It specifies the SSID of the network to be 
scanned

Channel

Optional

Value range: 

1-14,36,40,44,48,5
2,56,60,64,100,104
,108,112,116,132,1
36,140,149,153,15
7,161,165

Format:

 Integer

Default value:

 0

It specifies the specific channel for 
scanning. When this parameter is 
specified, the scan result of the specified 
channel is printed to the user.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands