manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 46

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

46

2018-02-16

PRELIMINAR

Y

6.7.4  Get SNTP Start

This command is used to get the status of SNTP start.

Command Syntax

AT+NSNTPSTART?

Parameter Description

Table 66, page 46

, describes the Get SNTP Start parameters.

Response

Table 67, page 46

, describes the responses and remarks for Get SNTP Start command.

Synchronous Response

Table 68, page 46

, describes the synchronous responses and remarks for Get SNTP Start 

command.

Table 66   Get SNTP Start Configuration Parameters

Parameters Mandatory/Optional

Value

Description

Status

Optional

Value range: 

N/A

Format:

 String

Default value:

 

N/A

It specifies the status of SNTP start 
(STARTED or NOT STARTED).

Table 67   Get SNTP Start Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 68   Get SNTP Start Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands