manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, At Commands Reference Manual

Share
Download
Telit Wireless Solutions WE866E4-P At Commands Reference Manual Download Page 124

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

124

2018-02-16

PRELIMINAR

Y

Synchronous Response

Table 265, page 124

, describes the synchronous responses and remarks for Start NMDNS 

Server command.

10.1.2.2  Stop NMDNS Server

This command is used to stop the server in mDNS module. Before issuing this command 
user is required to issue L2 and L3 and must have issued mDNS start command.

Command Syntax

AT+NMDNSSSTOP

Parameter Description

Table 266, page 124

, describes the Stop NMDNS Server parameters.

Response

Table 267, page 124

, describes the responses and remarks for Stop NMDNS Server 

command.

Table 264   Start NMDNS Server Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 265   Start NMDNS Server Synchronous Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Table 266   Stop NMDNS Server Parameters

Parameters Mandatory/Optional

Value

Description

Stop

Mandatory

Value range:

N/A

Format:

 N/A

Default value:

 

N/A

It indicates the mDNS module to stop.

Table 267   Stop NMDNS Server Response

Responses

Remarks

OK

Success.

Summary of Contents for WE866E4-P

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands