LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 163 of 273
#NITZ - Network Timezone
AT#NITZ=
[<val>
[,<mode>]]
Set command enables/disables (a) automatic date/time updating, (b) Full
Network Name applying and (c)
#NITZ
URC; moreover it permits to change
the
#NITZ
URC format.
Date and time information can be sent by the network after LTE registration
Parameters:
<val>
0 - disables (a) automatic data/time updating, (b) Full Network Name
applying and (c)
#NITZ
URC; moreover it sets the
#NITZ
URC
‘basic’
format (see
<datetime>
below)
1..15 - as a sum of:
1 - enables automatic date/time updating
2 - enables Full Network Name applying
4 - it sets the
#NITZ
URC
‘extended’
format (see
<datetime>
below)
8 - it sets the
#NITZ
URC
‘extended’
format with Daylight Saving Time(DST)
support (see
<datetime>
below)
(factory default is 7)
<mode>
0 - disables
#NITZ
URC (factory default)
1 - enables
#NITZ
URC; after date and time updating the following
unsolicited indication is sent:
#NITZ: <datetime>
where:
<datetime>
- string whose format depends on subparameter
<val>
“yy/MM/dd,hh:mm:ss”
-
‘basic’
format, if
<val>
is in (0..3)
“yy/MM/dd,hh:mm:ss±zz”
-
‘extended’
format, if
<val>
is in (4..7)
“yy/MM/dd,hh:mm:ss±zz,d”
-
‘extended’
format with DST support, if
<val>
is in (8..15)
where:
yy
- year
MM
- month (in digits)
dd
- day
hh
- hour
mm
- minute
ss
- second
zz
- time zone (indicates the difference, expressed in quarter of an
hour, between the local time and GMT; two last digits are
mandatory, range is -47..+48)
d
– number of hours added to the local TZ because of Daylight Saving Time
(summertime) adjustment: range is 0-2.
Note: If the DST information isn’t sent by the network, then the
<datetime>
parameter has the format
“yy/MM/dd,hh:mm:ss±zz”
AT#NITZ?
Read command reports whether (a) automatic date/time updating, (b) Full
Summary of Contents for LE910-SKG
Page 1: ......