LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 135 of 273
+CMGS - Send Message
AT+CMGF=1
AT+CSMP=17,167,0,0
AT+CMGS=”01090255219”,129
>TEST MESSAGE
+CMGS:125
OK
Reference
3GPP TS 27.005
+CMSS - Send Message From Storage
AT+CMSS=
<index>[,<da>
[,<toda>]]
Execution command sends to the network a message which is already stored in the
<memw>
storage (see
+CPMS
) at the location
<index>
.
Parameters:
<index>
- location value in the message storage
<memw>
of the message to send
<da>
- destination address, string type represented in the currently selected
character set (see
+CSCS
); if it is given it shall be used instead of the one
stored with the message.
<toda>
- type of destination address
129 - number in national format
145 - number in international format (contains the "
+
")
If message is successfully sent to the network then the result is sent in the format:
(Note : Optionally (when +CSMS <service> value is 1 and network supports)
<scts> is returned)
+CMSS: <mr>[, <scts>]
where:
<mr>
- message reference number.
<scts> - TP-Service Centre Time Stamp in Time String Format.
If message sending fails for some reason, an error code is reported:
+CMS ERROR:<err>
Note: to store a message in the
<memw>
storage see command
+CMGW.
Note: care must be taken to ensure that during the command execution, which may
take several seconds, no other
SIM
interacting commands are issued.
AT+CMSS=?
Test command resturns the
OK
result code.
Note
To avoid malfunctions is suggested to wait for the
+CMSS: <mr>
or
+CMS
ERROR: <err>
response before issuing further commands.
Example
AT+CMGF=1
OK
AT+CMGW="0165872928"
> test message...
Summary of Contents for LE910-SKG
Page 1: ......