Telit Wireless Solutions LE910-SKG, At Commands Reference Manual

Page: 123 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 123 of 273
+CNMI - New Message Indications To Terminal Equipment
<mt> - result code indication reporting for SMS-DELIVER
0 - No SMS-DELIVER indications are routed to the TE and message is stored.
1 - If SMS-DELIVER is stored into ME/TA, indication of the memory location is
routed to the TE using the following unsolicited result code:
+CMTI: <memr>,<index>
where:
<memr> - memory storage where the new message is stored
"SM"
"ME"
<index> - location on the memory where SMS is stored.
2 - SMS-DELIVERs (except class 2 messages and messages in the message
waiting indication group) are routed directly to the TE using the following
unsolicited result code:
(PDU Mode)
+CMT: <alpha>,<length><CR><LF><pdu>
where:
<alpha> - alphanumeric representation of originator/destination number
corresponding to the entry found in MT phonebook; used
character set should be the one selected with cCSCS.
<length> - PDU length
<pdu> - PDU message
(TEXT Mode)
+CMT:<oa>,<alpha>,<scts> [,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>] <CR><LF><data> (the information written in
italics will be present depending on +CSDH last setting)
where:
<oa> - originating address, string type converted in the currently selected
character set (see +CSCS)
<alpha> - alphanumeric representation of <oa> ; used character set should be
the one selected with cCSCS.
<scts> - arrival time of the message to the SC
<tooa> , <tosca> - type of number <oa> or <sca> :
129 - number in national format
145 - number in international format (contains the "
+ ")
<fo> - first octet of 3GPP TS 03.40/23.040
<pid> - Protocol Identifier
< dcs > - Data Coding Scheme
<sca> - Service Centre address, string type, converted in the currently
selected character set (see +CSCS)
<length> - text length
<data> - TP-User-Data

If <dcs> indicates that GSM03.38/23.038 default alphabet is used and
<fo> indicates that GSM03.40/23.040 TP-User-Data-Header-Indication
is not set (bit 6 of <fo> is 0), each character of GSM/WCDMA alphabet
will be converted into current TE character set (see +CSCS)