Telit Wireless Solutions LE910-SKG, At Commands Reference Manual

Page: 156 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 156 of 273
#SERVINFO - Serving Cell Information
<RSRP> - Reference Signal Received Power
AT#SERVINFO=?
Test command returns the OK result code.
#RFSTS – Read Current Network Status in E-UTRAN
AT#RFSTS
Read current status in the format
(E-UTRAN)
#RFSTS:
<PLMN>,<EARFCN>,<RSRP>,<RSSI>,<RSRQ>,<TAC>,[<TXPWR>],<DRX>,<MM>,<RRC>,<CID>,
<IMSI>,[<NetNameAsc>],<SD>,<ABND>[CR,LF] [CR,LF]
Parameter Example description
PLMN "262 25" Country code and operator code(MCC, MNC)
EARFCN 6400 E-UTRAN Assigned Radio Channel
RSRP -99 Reference Signal Received Power
RSSI -76 Received Signal Strength Indication
RSRQ -7 Reference Signal Received Quality
TAC 40A5 Tracking Area Code
TXPWR 0 Tx Power (In traffic only)
DRX 64 Discontinuous reception cycle Length(cycle length :
display using ms)
MM 19 Mobility Management
RRC 0 Radio Resource Control
CID 0000007 Cell ID
IMSI
“262011242110776”
International Mobile Station ID
NetNameAsc "
Telekom.de
"
Operation Name, Quoted string type or “” if network
name is unknown
SD 3 Service Domain
(0: No Service, 1: CS only, 2: PS only, 3: CS+PS)
ABND 20 Active Band (1..63) 3GPP TS 36.101
Note: MM - Mobility Management States are:
0 - NULL
3 - LOCATION_UPDATE_INITIATED
5 - WAIT_FOR_OUTGOING_MM_CONNECTION
6 - CONNECTION_ACTIVE
7 - IMSI_DETACH_INITIATED
8 - PROCESS_CM_SERVICE_PROMPT
9 - WAIT_FOR_NETWORK_COMMAND
10 - LOCATION_UPDATE_REJECTED