LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 66 of 273
+COPS - Operator Selection
Note : LE910KR doesn’t support <mode>=1 and 4 because LTE only doesn’t
support manual.
<AcT>
access technology selected:
7 E-UTRAN
AT+COPS?
Read command returns current value of
<mode>
,
<format>
,
<oper>
and
<AcT>
in
format
<format>
; if no operator is selected,
<format>
,
<oper>
and
<AcT>
are
omitted
+COPS: <mode>[,<format>,<oper>,< AcT>]
AT+COPS=?
Test command returns a list of quintuplets, each representing an operator present
in the network.
The quintuplets in the list are separated by commas:
+COPS: [list of supported (<stat> ,<oper (in <format>=0)>,,
<oper (in <format>=2)>,< AcT>)s][,,(list of supported <mode>s),
(list of supported<format>s)]
where:
<stat>
- operator availability
0 - unknown
1 - available
2 - current
3 - forbidden
<AcT>
access technology selected:
0 GSM
2 UTRAN
7 E-UTRAN
Note: since with this command a network scan is done, this command may require
some seconds before the output is given.
Example
AT+COPS?
+COPS: 0,0,"Test PLMN 1-1",0
OK
at+cops=?
+COPS: (2,"","","45008",2),(1,"Test PLMN 1-1","Test1-
1","00101",0),(3,"","","45005",2),,(0-4),(0,2)
OK
Reference
3GPP TS 27.007
+CLCK - Facility Lock/Unlock
AT+CLCK=
<fac>,<mode>
Execution command is used to lock or unlock a
ME
or a network facility.
Summary of Contents for LE910-SKG
Page 1: ......
