Telit Wireless Solutions LE910-SKG, At Commands Reference Manual

Page: 162 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 162 of 273
#MWI - Message Waiting Indication
4 - E-mail
5 - Other
<count> - message counter: number of pending messages related to the message
waiting indicator <indicator> as it is stored on SIM.
AT#MWI? Read command reports wheter the presentation of the message waiting indicator
URC is currently enabled or not, and the current status of the message waiting
indicators as they are currently stored on SIM. The format is:
#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>
#MWI: <enable>,<status>,<indicator>[,<count>][...]]]
AT#MWI=? Test command returns the range of available values for parameter <enable> .
#SIMPR – SIM Presence Status
AT#SIMPR=
[<mode>]
Set command enables/disables the Query SIM Presence Status unsolicited
indication in the ME.
Parameter:
<mode> - type of notification
0 - disabled (factory default); it’s possible only to query the current SIM
status through Read command
AT#SIMPR?
1 - enabled; the ME informs at every (local and remote) SIM status change
through the following unsolicited indication:
#SIMPR: <SIM>,<status>
where:
<SIM> - local or remote SIM
0 – local SIM
1 – remote SIM (Not Supported)
<status> - current SIM status
0 - SIM NOT INSERTED
1 - SIM INSERTED
AT# SIMPR? Read command reports whether the unsolicited indication #SIMPR is
currently enabled or not, along with the local SIM status, in the format:
#SIMPR: <mode>,0,<status>[<CR><LF>
#SIMPR: <mode>,1,<status>]
( <mode> , <SIM> and <status> are described above)
AT# SIMPR =? Test command returns the supported range of values for parameter
<mode> .
Example AT#SIMPR?
#SIMPR: 0,0,1
#SIMPR: 0,1,1
OK