Telit Wireless Solutions LE910-SKG, At Commands Reference Manual

Page: 200 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 200 of 273
#SGACTCFGEXT – Context Activation and Configuration
Note: values are automatically saved in NVM.
AT#SGACTCFGEX
T? Read command reports the state of all the six contexts, in the format:
#SGACTCFGEXT: <cid1>,<abortAttemptEnable1>,,0,0,0<CR><LF>
…
#SGACTCFGEXT: <cid6>,<abortAttemptEnable6>,,0,0,0
where:
<
cid n > - as < cid > before
< abortAttemptEnable n > - as < abortAttemptEnable > before
AT#SGACTCFGEX
T=? Test command returns the range of supported values for parameters
#FTPTO - FTP Time-Out
AT#FTPTO=
[<tout>]
Set command sets the time-out used when opening either the FTP control channel
or the FTP traffic channel.
Parameter:
<tout> - time-out in 100 ms units
100..5000 - hundreds of ms (factory default is 100)
Note: The parameter is not saved in NVM.
AT#FTPTO? Read command returns the current FTP operations time-out, in the format:
#FTPTO: <tout>
AT#FTPTO=?
Test command returns the range of supported values for parameter <tout>
#FTPOPEN - FTP Open
AT#FTPOPEN=
[<server:port>,
<username>,
<password>,
<mode>]
Execution command opens an FTP connection toward the FTP server.
Parameters:
<server:port> - string type, address and port of FTP server (factory default port
21).
<username> - string type, authentication user identification string for FTP.
<password> - string type, authentication password for FTP.
<mode>
0 - active mode (factory default)
1 - passive mode
Note : In FTP Open case, the solution dependency limits the maximum time out to