LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 89 of 273
+CTZR – Time Zone reporting
<onoff>:
0 Disable time zone change event reporting (default)
1 Enable time zone change event reporting
AT+CTZR?
Read command reports the currently selected
<onoff>
in the format:
+CTZR: <onoff>
AT+CTZR=?
Test command reports the supported range of values for parmeter
<onoff>
+CTZU – Automatic Time Zone update
AT+CTZU=<onoff>
This command enable and disables automatic time zone update via NITZ.
Parameters:
<onoff>:
0 Disable automatic time zone update via NITZ (default)
1 Enable automatic time zone update via NITZ
Note: despite of the name, the command AT+CTZU=1 enables automatic update of
the date and time set by AT+CCLK command (not only time zone). This happens
when a Network Identity and Time Zone (NITZ) message is sent by the network.
This command is the ETSI standard equivalent of Telit custom command
AT#NITZ=1. If command AT+CTZU=1, or AT#NITZ=1 (or both) has been issued,
NITZ message will cause a date and time update.
AT+CTZU?
Read command reports the currently selected
<onoff>
in the format:
+CTZU: <onoff>
AT+CTZU=?
Test command reports the supported range of values for parmeter
<onoff>
Summary of Contents for LE910-SKG
Page 1: ......
