Telit Wireless Solutions LE910-SKG, At Commands Reference Manual

Page: 155 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 155 of 273
#MONI - Cell Monitor
PWR:<dBm>
where:
<netname>
- name of network operator
<cc> - country code
<nc> - network operator code
<n> - progressive number of adjacent cell
<rsrp> - Reference Signal Received Power
<rsrq> - Reference Signal Received Quality
<tac> - Tracking Area Code
<id> - cell identifier
<earfcn> - E-UTRAN Assigned Radio Channel
<dBm> - received signal strength in dBm
<drx> - Discontinuous reception cycle length
AT#MONI=? Test command reports the maximum number of cells, in a neighbour of the serving
cell excluding it, from which we can extract E-UTRAN-related informations, along
with the ordinal number of the current selected cell, in the format:
#MONI: (<MaxCellNo>,<CellSet>)
where:
<MaxCellNo> - maximum number of cells, in a neighbour of the serving cell and
excluding it, from which we can extract E-UTRAN-related
informations. This value is always
6 .
<CellSet> - the last setting done with command #MONI .
#SERVINFO - Serving Cell Information
AT#SERVINFO
Execution command reports informations about serving cell, in the format:
(E-UTRAN)
#SERVINFO:<EARFCN>,<dBM>,[<NetNameAsc>],<NetCode>,<PhysicalCellId>,
<TAC>,<DRX>,<SD>,<RSRP>
where:
<dBM> - received signal strength in dBm
<NetNameAsc> - operator name, quoted string type
<NetCode> - country code and operator code, hexadecimal representation
<PhysicalCellId> - Physical Cell ID
<TAC> - Tracking Area Code
<DRX> - Discontinuous reception cycle length
<SD> - Service Domain
0 – No Service
1 – CS Only
2 – PS Only
3 – CS & PS