Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 67
Advanced Configuration - Modifying Settings
C
GLOSSARY
This part explains the special terms used in this manual.
Double End of Line (DEOL)
Tamper detection configuration (please refer to page 17)
Single End of Line (SEOL)
Tamper detection configuration (please refer to page 18)
Entry Delay
The entry delay is the period of time from entering the surveillance zone to the transmitter. In order to disarm the
system, user / installer needs to turn off the security switch and enter the surveillance zone. However, the delay time
starts from the 1
st
trigger by the 1
st
alarm sensor (i.e. Alarm4).
The detailed procedure is as below:
1)
user turns off security switch
2)
the alarm move to entry delay
3)
the 1
st
trigger is made by Alarm4 (i.e. user enter the surveillance zone and the delay time begin)
4)
2
nd
, 3
rd
and 4
th
trigger is made and each entry delay start respectively
5)
user disarm the system
For example, if the time for going from security switch to transmitter is about 8 minute, Delay1 should be equal to 8
minutes, Delay2 should be equal to the time for going from security switch to Alarm2, and so on.
APPENDIX
Security Switch
Alarm 4
Alarm 3
Alarm 2
Alarm 1
Entry
Delay4
Delay3
Delay2
Delay1
ARM/DisARM
Surveillance zone
Time line
