Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 65
Advanced Configuration - Modifying Settings
2.
Through Internet/Intranet
Step 1:
Make sure the transmitter is turned on and connect to your network with a valid IP address.
Step 2:
From Start menu, select
Program Files
Eye
III+
Transmitter Configuration
to
run the Configuration
program. Then, the Configuration program should appear.
Step 3:
Click on the
General
page.
In the
Connection
group
,
select
TCP/IP
in the
Device
menu.
Step 4:
Enter your transmitter’s IP address and port (default is
1024
) to
IP_address
and
Port
column respectively. At the same time, enter the administrator password at the
Admin Pwd
field (The default one is
“000000”
).
Step 5:
Click the
Connect
button. Please wait until it shows
Read Process --- Completed!
Message box
.
If
Transmission unit not found!
message is displayed, make sure that the
IP of the transmitter is valid and is turned on. And you can close the configuration program
and redo step 2.
Step 6:
Now you can make the necessary changes on the fields provided.
Step 7:
After making changes, press the
Save and Exit
button to write the information back to the
transmitter.
Step 8:
Please wait until it shows
Write Process --- Completed!
Message box
.
If
Transmission
unit not found!
message is displayed, make sure that the IP of the transmitter is valid and
is turned on. And you can close the configuration program and redo step 2.
