Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 38
System Configuration and Installation
Step 12: Enable
the
sure
LINK
feature and enter the sub-domain name (should be registered
before using) and refreshing rate (at least 15 minutes, recommended 30 minutes) in
the suitable fields provided. Enter DNS IP address in the
Server 1
and
Server 2
fields at
DNS Service
group (Please ask your ISP to get these information).
Step 13:
Ensure all settings are correct, then press the
Save and Exit
button
Step 14:
Please wait until it shows
Completed(
[baud rate]
)
message box, where
[baud rate]
shows the serial port baud rate for the communication between the PC and the
transmitter.
Step 15:
you have to ensure that the router in use mapped an external port (1024) to your
transmitter’s IP address so that you can access your transmitter through the Internet.
If you haven’t yet done so, please read
router configuration
next page for details.
Now you can close the configuration program, turn off the transmitter, remove the
serial cable and put it at any place you like.
*Note1: No Proxy Server Settings is required.
*Note2: Make sure you have done the router port mapping
