Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 28
System Configuration and Installation
Step 1:
Connect a shielded, straight-through 9-to-9 serial cable from the serial port of the
computer to the
AUX
port of the
VRB
.
Step 2:
Turn on the
VRB
. A blue light at the front panel will flash continuously if it is
successfully turned on.
Step 3:
Install the
VRB
’s Reception Software (WRS3-AD)
from the CD-ROM to the
computer.
Step 4:
After installation, from Start menu, select
Program Files
Eye
III+
Transmitter
Configuration
to run the Configuration
program. Then, the
Configuration program should appear as shown:
