Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 23
System Configuration and Installation
Step 7:
A
Completed(
[baud rate]
)
message box will be displayed. The default information
of the transmitter will be displayed at each field.
Step 8:
Configure the
Registration Checking
and
Video Mode
group settings. Leave the
Transmitter’s IP group with the default values.
Step 9:
You can check the “
Enable
” to activate the Built-in Web Server. This makes you
be able to see video through standard web browser.
Step 10:
Ensure all settings are correct, then press the
Save and Exit
button
Step 11:
Please wait until it shows
Completed(
[baud rate]
)
message box, where
[baud rate]
shows the serial port baud rate for the communication between the PC and the
transmitter.
Now the transmitter configuration is completed. You can turn off the transmitter and
remove the serial cable.
