Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 33
System Configuration and Installation
C1. For
Broadband Internet Connection
with Dynamic IP using Router
What You Need
To configure and set up the
VRB
, the following basic items are required:
Hardware:
VRB
The video transmitter supports up to 4/8/16 video sources in all PAL
or NTSC format.
PC - Minimum Requirement:
Pentium III 866 MHz
Windows 95, 98, ME, XP, NT or 2000 Operating System
128MB RAM
Power Adapter
It is a 12 VDC power adapter supplied by
Eye
Group.
Serial Cable
It is a shielded, straight-through, DTE (Data Terminal Equipment) -
DCE (Data Computer Equipment) serial cable. The cable needs a
DB-9 female connector for PC at one end and a DB-9 male
connector for the AUX port of
VRB
at the other side.
To WAN (Dynamic IP)
ADSL Modem
Router
Eye
III+ VRB
Straight
Network Cable
