Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 29
System Configuration and Installation
Step 5:
In the
General
page, choose the suitable serial port (COM1 or COM 2 or so on) in
the
Device
field for current connection to the transmitter. You will see all other fields
are dim but
Admin Pwd
, what you have to do is to provide an administrative
password. (The default administrator password is
“000000”
).
Step 6:
Before clicking the
Connect
button, please make sure that the transmitter is well
connected with your computer, and it is switched on. Or else, a warning message,
“
Transmission unit not found!
“ will appear. At that time, you have to close the
program and re-perform Step 4.
Step 7:
A
Completed(
[baud rate]
)
message box will be displayed. The default information
of the transmitter will be displayed at each field.
Step 8:
Enter your transmitter’s IP address and port (default is
1024
), and your network’s
subnet mask to
IP, Port and Subnet Mask
fields at
Transmitter’s IP
group
respectively.
