Eye
III+
Video Recording Transmitter
I
nstallation Guide
Page 42
System Configuration and Installation
DB-9 female connector for PC at one end and a DB-9 male
connector for the AUX port of
VRB
at the other.
RJ-45 Network Cable
It is a shielded, straight-through RJ-45 network cable. The cable will
connect the
VRB
to the hub of the
LAN
for typical application.
Software
Transmitter Configuration software
A PC with Transmitter Configuration program installed (included in
the CD-ROM WRS3-AD software).
Information
Valid IP address for the transmitter
Administrator Password for the transmitter (The default
administrator password is
“000000”.
You can change it in the
reception software)
Port number for the transmitter (default value is
1024
)
Your network gateway address (If you are not familiar with this, you
can use one suggested in later section)
Your network subnet mask (If you are not familiar with this, you can
use one suggested in later section)
