Teledyne LabMaster 10 Zi Series Operator'S Manual Download Page 198

Page: 198 / 235

Getting Started Guide

LM10Zi-GSM-E Rev A

191

Hardcopy Dialog Method

Touch

Utilities → Utilities Setup...

and click the

Hardcopy

tab. On

the Hardcopy dialog, touch the

E-Mail

button.

Touch inside the

File Format

data entry control and select a

graphic file format from the pop-up menu.

Touch the

Colors

control and choose

Standard

to print the screen

as it appears,

Print

to print the waveforms on a white

background, or

Black & White

to print the waveforms in black &

white.

Note

: Choosing

Print

colors saves printer toner or ink (when you

eventually do print from the file).

Touch the

Prompt for message to send with mail

checkbox if you

want to include remarks with the image.

Touch the

Hardcopy Area

control and choose which part of the

screen you want to print:



Grid Area Only

if you do not need to print the dialog area

and you only want to show the waveforms and grids.



DSO window

if you want to print the dialogs with the

waveforms and grids.



Full Screen

if you want to print the entire screen.

Touch the

Print Now

button.

Summary of Contents for LabMaster 10 Zi Series












































































































































































































































Search results

Summary of Contents for LabMaster 10 Zi Series

Reviews:

Teledyne LabMaster 10 Zi Series, Operator'S Manual, Page: 198 / 235

Search results

Summary of Contents for LabMaster 10 Zi Series

Reviews: