Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Page: 89 / 241

5-1
BLZZRD
Portable Refrigerated Sampler
Section 5 Extended Programming
The BLZZRD sampler has two sets of programming screens. The
first set, called standard programming screens, lets you set up
typical sampling programs easily and efficiently. The second set,
extended programming screens, lets you create sophisticated pro-
grams for complex sampling applications.
All of the sampling features available with standard pro-
gramming screens, discussed in Section 4, are available with
extended programming screens. However, the extended screens
provide several additional features and some screen display dif-
ferences which are discussed in this section. The menu flow-
charts for both sets of programming screens are in Appendix A,
Menu Flowcharts
.
Note
This section assumes that you have read, and are familiar with,
the instructions in Sections 3 and 4.
5.1 Switching Between
Standard and
Extended Modes
As a factory default, the first time you turn the sampler on it will
begin in standard programming mode. The start-up screen tells
you which programming mode the sampler is currently using.
You can switch between programming modes by entering a
numerical command at the main menu:
• Type
6712.1
to enter standard programming mode.
• Type
6712.2
to enter extended programming mode.
5.2 One-Part and
Two-Part Programs
Extended programming lets you set up a “one-part” program or a
“two-part” program. One-part programs let you fill all bottles of
the tub with one set of pacing, distribution, and enable settings.
Two-part programs add an additional set of extended pacing, dis-
tribution, and enable screens to the sampling program. Each set
of screens is called a program part. The program parts are simply
called part ‘A’ and part ‘B’. Both parts share the program settings
for suction-line length, suction head, and rinses and retries. They
also share one start-time setting.
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS