Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Page: 101 / 241

BLZZRD Portable Refrigerated Sampler
Section 5 Extended Programming
5-13
Example: Event Paced Sampling
1. Select EVENT PACED.
2. Use the arrow keys to select the parameters that
will trigger the event. To define the first event for
this example, select LEVEL.
3. Choose SET POINT.
4. Enter a set point of 1 foot.
5. Select ABOVE SET POINT.
6. Select LEVEL again.
7. Choose RATE OF CHANGE.
8. Choose RISES.
Selecting RISES will enable the event condition if a
rise of the amount and duration specified in step 9
occurs.
9. Enter 1 ft and press

. Then enter 2 hours.
10. Select pH.
11. Select RANGE.
12. Enter 4 for the lower range and 10 for the upper
range.
13. Choose INSIDE RANGE.
14. To stop entering events select DONE.
Proceed with the rest of the programming steps.
UNIFORM TIME PACED
FLOW PACED
EVENT PACED
NONUNIFORM TIME
EVENT01:
RAIN LEVEL FLOW
FR-TEMP pH5 SP_CO

DO5
“LEVEL” CONDITION:
SET POINT
RANGE
RATE OF CHANGE
“LEVEL” SET POINT:
1.000 ft
( 0.001 - 30.00)
ENABLED WHEN:
ABOVE SET POINT
BELOW SET POINT
EVENT02:
RAIN LEVEL FLOW
FR-TEMP pH5 SP_CO

DO5 DONE
“LEVEL” CONDITION:
SET POINT
RANGE
RATE OF CHANGE
CONDITION IS TRUE
WHEN “LEVEL”
RISES FALLS
“LEVEL” RISES
1.000 ft
__HOURS, __MINUTES
EVENT03:
RAIN LEVEL FLOW
FR-TEMP pH5 SP_CO

DO5 DONE
“pH5” CONDITION:
SET POINT
RANGE
RATE OF CHANGE
“pH5” RANGE:
LOWER: 4.00
UPPER:
10.00
( 0.00 - 14.00)
ENABLED WHEN:
INSIDE RANGE
OUTSIDE RANGE
EVENT04:
RAIN LEVEL FLOW
FR-TEMP pH5 SP_CO

DO5 DONE

PACING:
EVENT PACED
3 EVENT CONDITIONS
