Teledyne Everywhereyoulook BLZZRD Installation And Operation Manual Download Page 113

Page: 113 / 241

BLZZRD Portable Refrigerated Sampler

Section 5 Extended Programming

5-25

5.11.1 Sampler Enable

Responses

In addition to programming enable conditions, extended pro-

gramming lets you control the sampler’s response to its enable

state. You can:

•

Stay enabled after the first enable.

•

Set up a repeatable enable.

•

Take a sample at enable or disable.

•

Delay the start of sampling after the enable.

•

Reset the sampling interval countdown each time the

sampler is enabled.

•

Control the sampling interval countdown while

disabled.

•

Enable Part B of a two-part program when Part A is

done.

Once Enabled Stay Enabled

–

For certain monitoring pro-

grams, you may want the sampler to continue to sample, even

though the conditions that enabled the sampler no longer exist.

When you use the ONCE ENABLED, STAY ENABLED feature,

after becoming enabled the sampler takes samples until it

reaches the end of its program.

Note

The STAY ENABLED feature works only when the sampler
becomes enabled following program start. If you need this fea-
ture with enable

prior

to program start, contact Teledyne ISCO

for details.

Repeatable Enable

–

After enabling the sampler, the enabling

instrument (or instruments) continues to monitor the conditions

and disables the sampler when the conditions are no longer sat-

isfied. If re-enabled, the sampler resumes the sampling program.

Note

Repeatable enable is called “sampler latching” in flow meters,

flow loggers, and FLOWLINK. Latching a sampler produces
the same results as selecting YES; the difference is that the
external instrument controls the latching.

Sample at Enable or Disable

–

Yo u h av e th e o p tio n o f

directing the sampler to take a sample as soon as it receives the

enable and/or disable signal. If you program the sampler to stay

enabled and choose to take a sample at enable, the sample

ONCE ENABLED,
STAY ENABLED?

YES

Summary of Contents for Everywhereyoulook BLZZRD


















































































































































































































































Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands

Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands