Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Page: 26 / 241

BLZZRD ™ Portable Refrigerated Sampler
Section 1 Introduction
1-10
Distributor Shaft
Pump Shaft
Pump Paddles
Pump Band
Bulkhead Fitting
Latches
Handles
Metal Retaining Rings
Stainless steel
Draw Catches: EPDM (Ethylene Propylene Diene Monomer) rubber
Amphenol Connectors Cadmium-plated Aluminum
Table 1-2 BLZZRD Construction Materials (Continued)
Table 1-3 Technical Specifications for the BLZZRD Sampler
General Notes:
1. All weights may vary ±1 lb (±
1
/
2
kg).
2. All dimensions may vary ±
1
/
4
inch (±0.64 cm).
3. Sample delivery specifications valid for the following conditions and ranges, unless otherwise stated: 75 °F (24 °C)
ambient, sample liquid is tap water at 50 to 80 °F (10 to 27 °C), sample volumes from 50 ml to 1000 ml, suction line
lengths of 25 ft (7.6 m) or less, suction heads from 1 to 20 ft (0.3 to 6.1 m), atmospheric pressure between 29.92 and
31.89 inHg (760 and 810 mmHg), and a power source of a Teledyne ISCO High Capacity Power Pack at 12.5 volts
DC no load output.
Controller, Pump, and Tubing: Mechanical Specifications
Weight of Controller: Controller only: 13.0 lbs (5.9 kg)
With pump tube: 13.2 lbs (6.0 kg)
Controller Dimensions: Length: 10.3 in (26.0 cm)
Width: 12.5 in (31.7 cm)
Height: 10 in (25.4 cm)
Temperature Ranges: Operational: 32 °F to 120 °F (0 °C to 49 °C)
Storage: -20 °F to 140 °F (-29 °C to 60 °C)
Maximum Altitude: 2,000 Meters
Installation Category: II
Pollution Degree: 2
Humidity: 95% RH Maximum
Enclosure: NEMA 4X and 6
Enclosure: IP67
Pump: IP17
Typical Delivered
Volume Accuracy:
(The ability to deliver the programmed sample volume.)
±10 ml or ±10% of programmed value, whichever is greater.
Typical Repeatability: (The ability to repeat the delivered volume for a set of samples collected under
the same conditions.)
±5 ml or ±5% of the average of the maximum and minimum sample volume in a
sample set, whichever is greater, at lifts up to 25 feet.