Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Page: 18 / 241

BLZZRD ™ Portable Refrigerated Sampler
Section 1 Introduction
1-2
• Section 4, Standard Programming shows how to
program your sampler using standard programming
mode.
• Section 5, Extended Programming shows how to
program your sampler using extended programming
mode.
• Section 6, Running Programs describes how to run,
pause, and stop programs, and activities after a program
has run.
• Section 7, SDI-12 Sondes provides information on
setting up sondes to work with the sampler.
• Section 8, Remote Operation explains how the sampler
can be controlled remotely.
• Section 9, Maintenance covers the basic maintenance
required to keep your sampler in top operating
condition.
The appendices are:
• Appendix A, Menu Flowcharts
• Appendix B, Material Safety Data Sheets
• Appendix C, General Safety Procedures
• Appendix D, Replacement Parts
• Appendix E, Accessories
• Appendix F, Battery Selection Guide .
1.2 About 700 Series
Modules
The bay on the controller’s side accepts any of Teledyne ISCO’s
700 Series Modules. The 700 Series includes:
• 701 pH Parameter Module for monitoring pH and
temperature.
• 720 Submerged Probe Module for monitoring a flow
stream’s level and flow rate with a submerged probe.
• 730 Bubbler Flow Module for monitoring a flow stream’s
level and flow rate with a bubbler system.
• 750 Area Velocity Module for monitoring a flow stream’s
level, velocity, and flow rate.
• 780 4-20 mA Input Module for interfacing to
non-Teledyne ISCO devices with 4 to 20 milliampere
output signals.
The modules are optional accessories. The samplers do not
require them for operation. However, the modules offer a number
of advantages: they are an economical way to combine flow-rate
or parameter monitoring with sampling, and you can program
the samplers and modules as a single unit. Additionally, the sam-
plers store the readings in memory.
1.3 SDI-12 Sondes
The data parameters used by the sonde and sampler must
match. Some sondes have “plug and play” setup. Known as
“ISCO Ready,” these sondes can tell the sampler what values